DIY Ideas Of Bathroom Mirror With Storage
Bathroom Mirror With Storage – Storage racks and cabinets are useful in holding and organizing your belongings. But, they can often appear smooth and unsightly if left unadorned. Although you can buy decorative storage racks in a department store or home decoration store, they can be expensive and may not fit into your budget. Save money by building your own storage shelf, which can be decorated with mirror tiles to create a more elegant and beautiful place to store your belongings.
Cut four wooden boards with a circular saw to measure 72 inches in length. Cut four rectangles of plywood to measure 20 inches wide, 48 inches long. Sand all pieces cut using medium grain sandpaper to make them smooth and smooth. Paint all pieces of wood and plywood with water-resistant latex paint. Allow the paint to dry for six to eight hours. Place two of the long boards vertically on a flat surface, spacing them 24 inches apart. Then, place the other two boards, spacing them 24 inches apart as well.
24 Photos Gallery of: DIY Ideas Of Bathroom Mirror With Storage
Place long 24-inch strips horizontally across the long boards, placing four short boards per pair of longboards. And then, place the two pairs up on one of the long sides with the short boards facing inwards. Place the storage shelf upright, and place the short plywood pieces on each of the shelves created by the short boards. Place the long plywood pieces against the sides of the storage shelf, and nail them in place with 1/2 inch long nails. Heat a hot glue gun for 10 minutes, then squeeze a line of hot glue around the perimeter. Repeat this process to adhere to the mirror tiles over the entire surface of the sides of the storage shelf.